Element Credential Configuration
An element is a network device, such as a router, radio, or fiber terminal. The Preseem Network Poller connects to these devices to collect performance data and identify which equipment serves each subscriber.
Find your vendor and equipment below. Requirements are grouped where they match; they do not apply automatically to every model from that vendor. Use the row for your device family and confirm any firmware-specific requirements during setup.
Credentials marked for Preseem Plus support its additional radio data and scoring. Bridge table extraction is needed where Preseem must identify equipment connected behind a customer radio or fiber terminal.
|
Vendor |
Equipment / models |
Credentials required |
|---|---|---|
|
Adtran |
TA5000 (fiber) |
SNMP: Required for fiber equipment polling (community string). |
|
Adtran |
SDX 6000 (fiber) |
NETCONF credentials: Required for fiber equipment polling (read-only username/password; SSH port 830). |
|
Baicells |
CloudCore / base stations |
Management credentials: Required for CloudCore/OMC integration (username/password). Management URL: Required for on-premises deployments. Base-station credentials: Required for direct subscriber IP collection (web username/password). |
|
BDCOM |
Fiber equipment |
SNMP: Required for fiber equipment polling (community string). SSH credentials: Required for fiber equipment data (username/password). |
|
Calix |
E7-2 / E3-2 (fiber) |
SNMP: Required for fiber equipment polling (community string). SSH credentials: Required for fiber equipment data (username/password). |
|
Cambium |
Radios |
SNMP: Required for access-point polling (community string). |
|
Cisco |
Routers |
SNMP: Required for router polling and PPPoE polling where used (community string). |
|
Druid |
Raemis core |
Raemis credentials: Required for mobile-core integration (URL, username/password). |
|
IgniteNet |
Radios |
SNMP: Required for access-point polling (community string). SSH credentials: Required for bridge table extraction (access-point username/password). |
|
Juniper |
Routers |
SNMP: Required for router polling and PPPoE polling where used (community string). |
|
LigoWave |
Radios |
SNMP: Required for access-point polling (community string). Web credentials: Recommended for complete metrics (access-point username/password). |
|
MikroTik |
Radios |
SNMP: Required for access-point polling (community string). Customer-radio SNMP access may also be needed for bridge table extraction. API credentials: Required for full metrics and Plus scores (username/password). |
|
MikroTik |
Routers |
SNMP: Required for router polling (community string). API credentials: Required for PPPoE or IPv6 mapping (read-only username/password). |
|
Mimosa |
Radios |
SNMP: Required for access-point polling; also required on customer radios for Plus (community strings). Web credentials: Required for bridge table extraction (access-point password). |
|
Tachyon |
Radios |
SNMP: Required for access-point polling (community string). Access-point credentials: Required for access-point polling (username/password). Admin permissions are required for bridge table extraction. |
|
Tarana |
Base nodes |
Web credentials: Required for base-node polling (username/password). |
|
Telrad |
BreezeVIEW / mobile core |
BreezeVIEW credentials: Required for mobile-core integration (URL, username/password). |
|
Ubiquiti |
Radios |
SNMP: Required for access-point polling (community string). Access-point web credentials: Required for Plus (username/password). Customer-radio web credentials: Required for bridge table extraction (username/password). |
|
Ubiquiti |
Wave |
SNMP: Required for access-point polling (community string). Customer-radio web credentials: Required for bridge table extraction (username/password). |
|
Ubiquiti |
U-Fiber |
SNMP: Required for fiber equipment polling (community string). Web credentials: Required for fiber equipment data (username/password). |
|
ZTE |
ZXA10 (fiber) |
SNMP: Required for fiber equipment polling (community string). |
SNMP
SNMP lets Preseem read device status, performance metrics, and network information used for subscriber mapping. Provide the device’s read-only community string and enable SNMP access from the poller. For SNMPv3, provide the username, authentication protocol and key, and privacy protocol and key instead.
Web Credentials
Some devices expose information through their web interface that is unavailable through SNMP. Preseem uses a device login to collect these additional metrics or mapping details. Provide the username and password for the access point, customer radio, or fiber equipment listed in the table.
SSH and NETCONF Access
Some fiber equipment requires a remote login to collect device and subscriber information. Preseem uses SSH or NETCONF, depending on the model. Provide the device username and password and allow the required connection from the poller.
Bridge Table Extraction
Bridge tables show which devices are connected behind a customer radio or fiber terminal. Preseem uses this information to associate a subscriber’s router with the equipment serving that customer. This uses SNMP, web, or SSH access, depending on the device; the table identifies any additional credentials required.
Adding Vendor Credentials
Send Support the vendor, model, management IP, any custom ports, and the credentials listed for your equipment. Use the secure transfer method Support provides. Allow access from the poller’s source IP; Support will add the credentials and test polling.