Skip to content
English
  • There are no suggestions because the search field is empty.

Preseem Appliance & Minimum Requirements

Preseem hardware sits inline in your network, transparently bridging subscriber traffic to measure quality of experience, enforce plan speeds, and report performance data to Preseem Cloud. You can deploy Preseem on a dedicated Preseem appliance or on your own hardware, as long as it meets the requirements outlined in the Generic Hardware section. 

Appliance Models

Preseem offers dedicated appliances to suit a range of network sizes and throughput requirements. Current and legacy models are listed below; legacy models are no longer available for purchase but may still be in service in existing deployments.

Model

Status

Notes

Preseem 15K

Image-1

Current

Capacity: 20 Gbps aggregate capacity.

Management: 1x1 GbE RJ-45

Data:  8 × 1 GbE RJ-45, with additional data interfaces available via the front-facing NIC module slot (supporting 10G / 25G / 40G / 100G via SFP+ / SFP28 / QSFP modules) 

See the NIC and transceiver tables below.

Preseem 40K

Image-2

Current

 

Capacity: 100 Gbps+ aggregate

capacity for larger deployments.

Management:  1 × 1 GbE RJ-45

Data: Four front NIC slots supporting 10G, 25G, and 100G modules. Transceiver and encoding requirements are the same as the 15K.

Preseem 1000 / 5000 / 10000 / 20000

Legacy

No longer available for purchase; may still be in service in existing deployments. Preseem 2.x support varies by model (the Preseem 1000 is not supported on 2.x). Contact Preseem Support to confirm compatibility or discuss upgrade options.

 

Preseem Appliance ModelsPreseem-Hardware-15K-chassis

Image-1: Preseem 15K

 

Preseem-Hardware-40K-chassis

Image-2: Preseem 40K

Generic (Customer-Provided) Hardware

You can run Preseem on your own server hardware, as long as it meets the performance and compatibility requirements below. The CPU, memory, and network interfaces you need depend on the throughput your deployment must support. We recommend contacting Preseem Support before you deploy, so our team can confirm your planned hardware will perform as expected.


Minimum Hardware Requirements (Preseem 2.x)

Note: Final hardware sizing depends on throughput, packet rate, enabled features, number of intersected links, and deployment topology. Throughput values are planning estimates, not guaranteed performance.

Requirement

Up to 7 Gbit/s

Up to 20 Gbit/s

Up to 50 Gbit/s

Up to 100 Gbit/s

CPU

Intel Core i7-7700 or equivalent

Intel Core i7-14700 or equivalent

Intel Xeon Gold 6252N or equivalent

AMD EPYC 9454P or equivalent

Memory

16 GB DDR4

64 GB DDR4

96 GB DDR5

256 GB DDR5

Boot SSD

128 GB minimum

128 GB minimum

128 GB minimum

Sized by deployment

Data Network Interfaces

Intel 700 or 800 series (e.g., X710, XL710)

Intel XXV710, XL710, or E810

Intel E810

Intel E810

Management Network Interface

1 dedicated interface

1 dedicated interface

1 dedicated interface

1 dedicated interface

INFO: The hardware requirements above cover the inline appliance only. For Preseem 2.x, plan a separate VM for the poller as well.

Operating System

Current supported Operating Systems with compatible Preseem Versions:

Preseem Version

CentOS Stream 10

Fedora 43 & 44

Preseem 2.x

Preferred

Not supported

Preseem 1.x

Preferred

Supported

The hardware requirements above cover the inline appliance only. For Preseem 2.x, plan a separate VM for the poller as well.

Rack, Mounting, and Power Specs

Specification

Preseem 15K

Preseem 40K

Form factor

1U, 19" rackmount

1U, 19" rackmount

Rack mounting

2-post

4-post

Power supply

Single ATX power supply, 220 W

1+1 redundant ATX power supplies, 1300 W

Cooling

3 fans with smart fan control

5 individually hot-swappable fans

The Preseem 40K requires a 4-post rack. The Preseem 15K can be mounted in a 2-post rack.